VIVA FINESSE wine red glazed


The gentle flat roof tile.

  • Engobes and glazes are applied to both sides of the foot area and on the rear for the best colour effect
  • Can be used almost anywhere
  • Flash-free smooth transitions simplify the installation process
  • A versatile verge tile that can be used for any gauge
  • Up to 8 tiles can be conveniently and safely stacked during roofing
natural red
natural red
NUANCE copper red engobed
NUANCE copper red engobed
NUANCE dark brown engobed
NUANCE dark brown engobed
NUANCE anthracite engobed
NUANCE anthracite engobed
FINESSE black glazed
FINESSE black glazed

Technical data

Size (appr.)268 x 403 mm
Covering width on av. approx.220 mm
Max. coverage width (approx.)222 mm
Covering width min. approx.218 mm
Covering length on av. approx.350 mm
Max. gauge (approx.)355 mm
Min. gauge (approx.)342 mm
Average tile requirement (approx.)13.1 pcs/m²
Brickware max. approx.13.4 pcs/m²
Tile requirement min. (approx.)12.7 pcs/m²
Weight per m² (approx.)45.9 kg/m²
Weight per pallet (approx.)865 kg
Unit weight (approx.)3.5 kg/piece
Pcs per pallet240 piece
Pcs per mini-pack4 piece


Valid for Germany
Roof pitch DUO extra (Germany)≥ 14 °
Roof pitch QUATTRO longlife extra (Germany)≥ 10 °
Roof pitch TRIO extra (Germany)≥ 12 °
Roof pitch DUO longlife ND extra (Germany)≥ 12 °
Valid for Austria
Roof pitch DUO longlife ND extra (Austria)≥ 17 °
Roof pitch DUO extra (Austria)≥ 17 °
Roof pitch QUATTRO longlife extra (Austria)≥ 15 °
Roof pitch TRIO extra (Austria)≥ 17 °

Technical informations

  • The technical drawing shown is merely an example.
  • According to the Central Association of the German Roofing Trade (ZVDH) rules for verge tiles, the distance between the inner edge of the verge lug and the outer edge of the gable wall or cladding must be at least 1 cm.
  • Current national rules and standards apply to the execution of roofing work. These vary from country to country (e.g. ZVDH Rules, Austrian Standards) and must be taken into consideration during execution. As manufacturer's information, CREATON-specific information about the execution of the sub-roof is also applicable and is complementary to these. You can find them in our Roof Planner or at /
  • Bitte berücksichtigen Sie das Musterschreiben für die Regeldachneigungen CREATON.


LAF-/FLA values in mm for 30x50-battens
Ridge tileDN10°15°20°25°30°35°40°45°50°55°60°
G10 2.5 pcs./m.LAF6060555045353530302525
G10 2.5 pcs./m.FLA11011010510095908575656050
LAF-/FLA values in mm for 40x60-battens
Ridge tileDN10°15°20°25°30°35°40°45°50°55°
G10 2.5 pcs./m.LAF60605545403030201510
G10 2.5 pcs./m.FLA12012011511010510095857570
LAF-/FLA values in mm for 50x50-battens
Ridge tileDN10°15°20°25°30°35°40°45°
G10 2.5 pcs./m.LAF5555504035202010
G10 2.5 pcs./m.FLA130130125120115115110100